DIN125 Galvanized flat pads and elastic pads
Flat gasket flat gasket as a part to prevent bolt nut locking, in the place where fasteners are used will basically use flat gasket, flat gasket mainly plays the role of increasing the contact area between products and fastening, by increasing the contact area, can reduce the damage of friction between parts, can also reduce the pressure between nuts and equipment, so as to play a protective role. Flat washers do not have the effect of preventing loosening and vibration. When using flat pads, they are often used in conjunction with nuts.y. When the flat gasket is stored, it must be in the most effective sealing time, and there are necessary important characteristics: in the case of a harsh environment, the flat gasket should be sealed, and it is not easy to leak when a certain temperature and pressure are working time. When the flat gasket is connected to the contact surface, it is necessary to ensure better sealing, just like the effect.
When the gasket is under pressure, under the influence of temperature, the anti-wrinkle ability should be better, otherwise the screw will be damaged, and hard gas leakage will occur.
Do not get infected when using a flat pad. The use of flat pads can be well disassembled, which is the biggest effect of choosing a flat pad.
Remember to use the flat pad at a relative temperature.
1. Increase the contact area between the screw and the machine.
2. Eliminate the damage of the spring pad to the surface of the machine when removing the screws. When used, it must be a spring pad and a flat pad, the flat pad is next to the surface of the machine, and the spring pad is between the flat pad and the nut
1. By increasing the contact area, the parts can be protected from damage;
2. By increasing the contact area, the pressure between the nut and the equipment is reduced, so as to play a protective role.
Detailed Diagram
